|
|
|
| Model GP-3A |
| Air Operated, Single Diaphragm, 4.6 Gallon Hopper. |
|
 |
| Model GP-3A |
|
|
| IDEAL FOR GROUTING METAL DOOR FRAMES |
|
• Low air consumption |
| • Adjustable output pressure and cycle speed |
| • Easy to operate, minimal maintenance required |
| • Pumps most types of cementitious grout (not for epoxy-type grouts) |
| • Makes an ideal tool for placing grout anywhere that high pressure is not required |
| • Lightweight and compact | |
| |
| Specifications Model GP-3A |
| HAND OPERATED GROUT PUMP |
| Model: |
Kenrich GP-3A |
| Pump Type: |
Single Diaphragm, Self-Priming |
| Power Source: |
Compressed Air |
|
Air Consumption: |
Less than 3 cfm |
|
Pump Controls: |
Start/Stop Switch, Speed Control, Air Pressure Regulator and Gauge |
| *Output Capacity: |
5 gallons/minute (40 cu. ft./hr) |
| Output Pressure: |
0 to 15 psi |
| Hopper Capacity: |
.62 cubic foot (4.6 gallons) |
| Placement Hose Size: |
1-1/2" ID by 60" long, Clear Vinyl |
| Discharge Head: |
10 foot Vertical Lift |
| Dimensions: |
23-1/2" x 12" x 23" high |
| Net Weight: |
27 pounds | |
*Output and performance will vary depending on cycle rate,
viscosity of the grout mixture and pressure conditions. | |
| |
| OPTIONS |
| Hose Reducer Kits: |
3/4" and 1" ID available |
| Hose Lengths: |
10 feet, 15 feet, and 20 feet |
| 1-1/2" Hose Ends: |
Straight, 90 degree and 180 degree Elbows |
| Port Seal: |
Rubber, will fit 1-1/2" Hose Ends |
|
| | |
| |
|
|
| |
